Tag Archives: fix printer

For Epson Printer Support, Call us now @


Epson Printer Error Code 0xe3 Solved: Avail Assistance from the Professionals in Printer Repair

Printers are delicate devices which are useful for transforming soft copies into hard copies. There are a lot of printer brands in the market, among which Epson is considered to be one of the best. It is highly preferred by people because of the standard features and unbeatable performance. These printers have good endurance and offer a variety of features, primarily emphasizing on delivering quality prints. However, technical devices suffer from errors after a certain point, and the all-rounder Epson printers are no exception.

A very common error code faced by Epson printer users is error code 0xe3. This basically occurs due to the paper jam, obstruction or faulty cartridge. Are you among those who are wondering how to fix Epson error code 0xe3? Follow the write up to get an overview of the reasons and possible solutions to resolve the issue.

Everything You Need to Know about Epson Error Code 0xe3:

Epson printers are capable of printing and scanning documents. With continuous usage, the printers can suffer a breakdown and cease to perform. Epson error code 0xe3 arises when the packaging material gets stuck on the cartridge caddy of your Epson printer. It may also occur if the cartridge is not properly placed on the desired area. Usually, it takes place when a new printer is being set up by the person. The chances of this error increase if the user makes mistakes while installing it. Additionally, it can also show up when you are about to launch your system and you get stuck at the initial step.


The error code may hamper your device in several ways. If you happen to face this with your brand new Epson printer, we understand how frustrated you might feel. It will stop the initialization process and you cannot start the printer. Secondly, if any foreign body is stuck in your cartridge caddy, you might need to remove the cartridge from the cradle and clear the area. This procedure is quite risky because if you have not done it before, you might increase the damage.

Simple Tricks to Clear the Cartridge Caddy of Your Epson Printer

Turn the all-in-one printer off and on again. Then go for printing a self-test report. If this method doesn’t help you out, then you need to remove the cartridge from the cradle. For that, you need to have the new cartridge ready. To do so, have a look at the following steps:

  • Switch on the printer
  • Pull up the cover of the scanner
  • Make sure you do not touch the print head by your hand and keep away from the white cable which is located inside the printer.
  • After you are done with lifting up the scanner unit, tap on the stop button and wait for the print head to move the cartridge to the indicator position.
  • if you want to remove a cartridge which is full, press and hold the stop button for 5 seconds and then wait for the cartridge to move to the replacement position.
  • Carefully remove the cartridge straight from the cradle by squeezing the tab of the cartridge.
  • Now, clear the area if you see anything stuck in the cradle.
  • Before placing the new cartridge, shake it four to five times while it is still sealed.
  • Avoid leaks by checking the sealed area before you shake the ink.
  • Remove the packet from the cartridge and do not touch the green chip area.
  • Install the new cartridge instantly after you remove the old one and place it on a clean cotton cloth.
  • Carefully take out the yellow tape from the sides of the cartridge
  • Finally, install the brand new cartridge and push it without bending until it adjusts into the cradle.

After the installation is complete, pull down the scanner unit and tap on the stop button. Make sure the print head moves back to the home position and initiates the ink charging procedure. Keep a check on the power light because it will be signaling the time taken by the print head to charge the ink. Do not turn off the printer until the power light is not completely off. This process is sufficient to resolve error code 0xe3 and ensures that you can resume printing.

If you are still facing error code 0xe3, it means the installation has not been performed accurately. Quickly go back to your printer and perform these additional steps to resolve Epson printer error code 0xe3 at the earliest.

An Alternative Method to Resolve Epson Printer Error:

Making mistakes while setting up a technical device is normal. You can choose to fix printer by opting for trouble-free professional help. But, if you wish to fix error code 0xe3 on your own, you can try an alternative method to resolve the issue.

  1. Switch off the printer and remove the power connection and USB cable if you happen to have one.
  2. Pull up the printer cover and look for any paper jam. If you can locate paper bits, remove it from the device.
  3. Reconnect the printer
  4. Try pressing the Copy button just to see if the print unit is responding.
  5. Check for transit tapes and foam blocks inside the printer. Carefully clear them.

If none of the methods helped you out, you must be struggling with ways to resolve Epson printer error code oxe3. We can understand how irritating it might be for you. However, you can resolve your printer errors by seeking for a professional’s help. Make sure that you opt for a reliable service provider to fix printer issues at the earliest.

Reach the Professionals for Superb Printer Repair Solutions:

A sudden decrease in your Epson printer’s efficiency can strictly restrict your productivity. This is where our technical experts come into play. Our dedicated professionals at epsonsupport247 are working round the clock to provide you with essential printer repair solutions in your budget. We have devised multiple channels of communication for our customers. You can call us on our helpline number 8388000650 to fix printer issues by sharing your queries with our experts. In addition, you can utilize our live chat portal to get handy solutions online. Alternatively, you can drop an email describing your issues and our experts will get back to you and address the problem within 24 hours.

epson error code 031008

Effective Techniques to Fix Epson Error Code 031008: Connect with Experts to Avail Affordable Printer Repair Services

A printer is a useful device which reduces the burden of dealing with a tedious amount of paperwork. When you are thinking about buying a premium quality of the printer, no other brand can match the high standards of Epson. Epson Inc. is an international brand which offers high-quality printing and several other exciting features. The company develops a wide range of laser, inkjet, wireless, color and all-in-one printers. Irrespective of the unmatched quality that the company boasts of, Epson printer models often develop different epson error code 031008 during its runtime.

Error code 031008 is the most common error which you might find while using Epson printers. Epson Workforce Pro WF-4750, Epson WF-4720 printer, etc. are famous Epson printer models which are the worst victims of this error message. Epson error code 031008 generally occurs due to improper insertion of the printhead or ink cartridges. Accumulation of dust on these two printer components can cause this error code to appear. It occurs suddenly in between an ongoing printing session without giving any prior intimation. In case you are struggling with this error code while working on your Epson printer, read this blog to avail accurate solutions and fix Epson printer error at the earliest.

Quick Fixes to Solve Error Message 031008 on Your Own:

The sudden appearance of epson error 031008 can put a break to your printing session for an indefinite time. And this is just the usual case when it comes to printer error codes. Like this one and others like the Epson printer error code 0xf1, all of which you can fix yourself with proper instructions. Check out the basic steps which you can apply to fix this error code quickly.

epson error code 031008

Restarting Your Epson Printer:

It might be a bit surprising for you to know that most printer error codes and messages disappear once you restart the machine. Follow the steps mentioned below to troubleshoot the issue at the earliest:

  • Remove the power cable from the power source
  • Tap on the power button  and hold it for approximately 60 seconds
  • Plug in the power cable into the wall outlet again
  • Leave the power button as soon as the printer is turned on
  • Try to take a sample print to check whether the error code reappears or not

If the error message reappears on your Epson printer’s control panel, you should try to reset your Epson printer. The necessary steps to reset your Epson printer are mentioned below.

Eliminate Epson Error Message 031008 by Hard Resetting the Printer:

Printer reset is a complicated process which involves a series of complex steps. Perform this method only when you are confident about not making any mistake during the process. A manual mistake might harm your device and reduce its efficiency. Given below are some easy steps to reboot your Epson printer which any beginner can apply:

Easy Steps to Reboot Your Epson Printer:

  • Switch off the printer and take out the power cord from the wall outlet
  • Wait for sometime and then plug in the power cord again to the wall outlet
  • Power on the printer and hold the resume key for another 10 to 20 seconds
  • You will receive a message saying “reset the printer to default settings” in the control panel of your Epson printer
  • Tap on “OK” and release the resume key
  • Take a sample print to inspect if the error message appears again

In case you receive Epson error 031008 again on your printer, it indicates that the problem is either with the printhead or the cartridge. You need to instantly arrange cleaning or reinstalling of these two vital printer components to fix error code 031008. Go through the next paragraph thoroughly to know how to run the cleaning or resetting process.

Smart Tricks to Clean and Reset the Ink Cartridge of Your Epson Printer:

Ink cartridge is an essential component of any printer which constantly supplies ink to the printer for creating the prints. In case the ink cartridge is not installed correctly, Epson error 031008 might appear during the printing session. Following are the steps to reset the ink cartridge with a faulty installation.

  • Power of the printer and remove all attached cables and cords
  • Open the cartridge cover and remove the ink cartridge from your Epson printer
  • Clean it with a dry cotton cloth and reinsert it again
  • Tap on the reset button firmly against the chip contacts present on the cartridge for sometime
  • A bright red light will blink which indicates a strong contact between the cartridge and the printer has been established
  • Hold the reset button for a few seconds until a green LED light begins to blink
  • This will confirm the successful completion of the cartridge reset process

Check whether Epson error code 031008 strikes your printer by taking a sample print. If the answer is yes, you can be sure that the ink cartridge is not the factor responsible behind the occurrence of this error code. Rather, a problem in the printer head installation might be causing this error code to appear. The next paragraph will give you a thorough insight into the printhead installation/cleaning procedure.

Wondering How to Reinstall or Clean the Printhead of Your Epson Printer?

You can clean the printhead via the automatic and manual process. The automatic process involves the use of the guidelines mentioned in the printer manual that comes with your device. The steps of the manual cleaning process are discussed below:

  • Power off the printer by unplugging the power cords from the wall outlet
  • Take out the ink cartridges from the printer
  • Take the printhead out from the printer by opening the latch behind
  • Take a dry cotton cloth and clean the printhead contacts properly
  • Place the printhead again within the device and use the latch to set the printhead in its correct location
  • Place the ink cartridges again within the printer
  • Take a sample print to confirm the removal of this error code

Still receiving the same error code time and again on your Epson printer’s control panel? You must consult with a reliable printer repair service provider to fix printer problems efficiently and at a budget-friendly price.

Avail Pocket-Friendly Solutions to Fix Epson Printer Errors by Connecting with Us:

Sudden obstruction in the printing job can put a break on critical official tasks and require immediate attention. Our tech experts at Epsonsupport247 enjoy the reputation of being the most reliable printer service provider in the market by offering advanced solutions. Place a call at our printer support number +1-855-789-0290 irrespective of time and share your issues with our experienced engineers. They will offer you printer repair service at a reasonable price to fix printer issues with perfection. You can drop an email to us and receive solutions within the next 24 hours. In addition, you can talk to our tech experts in real-time via our live chat window during busy working hours. They will offer you instant solutions to solve all Epson printer related errors within a short span.

Fix-Epson-Printer-Error-Code-0x95 (1)

Resolve Epson Printer Error Code 0x95 Instantly: Experience hassle-free Printing with Your Epson printer

Epson printers are one of the most widely preferred printers for both personal and professional use. These printers are known for reliability, cutting-edge technology, and excellent performance. Over the years, these devices have gained huge popularity among users largely due to its multifunctional features which make it compatible not only with printing documents but also for scanning. Another reason which makes Epson printers more feasible is its user-friendly features. Let us remind you that irrespective of how advanced the technology of your device is, it will undoubtedly develop technical errors that will be difficult to resolve. One such technical error is Epson error code 0x95, which is a bit hard to fix for naive users.

What is Epson Error Code 0x95?

There is no doubt that your Epson printer prints excellently. But suddenly an error might occur in it which would disturb your printing queue. If such an error occurs with your Epson printer, you have to fix that error and restart your printer for continuing the process of printing. Epson printer error code 0x95 is one such general printer error which might pop-up in your printer anytime and restrict you from printing further. It can occur when the ink pad gets full saturation or due to the irregular cleaning of the print head. This error code also comes along with a message “The parts inside your printer are reaching the end of service life.” If you are clueless about the ways to solve the issue, keep on reading this blog to gain a fair idea regarding the process to address the issue, epson printer error turn power off and then on again.

Fix-Epson-Printer-Error-Code-0x95 (1)

Situations When You Can Get the Epson Printer Error Code 0x95:

Usually, the appearance of this error occurs when the printer’s ink pad has reached the saturation level. However, there are some other situations when you can get this error, such as:

  • During sudden start-up or shut down of your Windows application.
  • When the previous update of Windows has failed and caused corruption of the system files
  • During installation and uninstallation of applications on Windows

Any of the above-mentioned situations can lead to this error. If your device is displaying the same issue, it is advised to take it to a nearby printer repair service center to fix the error and get better results.

Probable Reasons for the Occurrence of Epson Error Code 0x95

Epson inkjet products have a finite lifespan. At some point, it reaches a condition when it fails to provide its users with satisfactory print quality. This happens because certain components of your printer have reached the end of their usable life and will not work further until and unless it is serviced. printer is turned off error, Thus, when the ink pads of your Epson printer reach a certain limit, they become saturated and your printer displays this error code.

Technically speaking, the ink pads of your printer are porous and they collect the ink which is not being used on the printed pages. It keeps on collecting the ink during cleaning cycles, at the time of initial setup of the product or when your printer is bound to print borderless photographs. Thus, when you have used your printer for some years, these ink pads become full of ink and lose their capability to absorb more ink. Under such circumstances, your device displays error code 0X95.

Elementary Solutions to Troubleshoot Epson Error Code 0x95:

Before visiting a service center to fix printer, you can try out the recommended steps to troubleshoot and easily fix error code 0x95 by yourself. Follow the instructions provided below:

  1. Check the Ink Heads of Your Epson Printer

At first, check the ink head of your Epson printer. Make sure that it is properly seated. There are several reasons which lead to the generation of this error code in your printing machine such as the digital eye, full ink pad, dirty print head, unbalanced ink and ink sitting under the maintenance box of your printer.

To solve this issue, just switch off your printer and unplug it completely for a couple of seconds. Now try to remove and replace the sponge and clean the digital eye.

  1. Perform Manual Troubleshooting with the Epson Printer

You need to follow these steps carefully in order to troubleshoot your Epson printer error code 0x95 manually:

  • Power on your Epson printer
  • Hold “Press + Hold” button all together to stop ink power buttons
  • Now wait for sometime before you switch it off
  • Turn it on to check whether the problem still persists
  1. Run System Under Safe Mode

Try to run your Windows PC under Safe mode and then check whether you are still receiving this error. If you still receive the error, move on to the next step to troubleshoot your Epson printer.

  1. Uninstall the Recently Installed Software from Your System

Error code 0X95 might occur due to installing a new software program. Due to the incompatibility in the settings of the software program with the system, you can encounter this error. For that, you need to follow these steps to uninstall the software from your system and fix this error instantly:

  • Click on the “Start” button and select “Programs and Features”
  • Go to the option through Control Panel
  • Now uninstall the recently installed software programs from your system by choosing the particular program/programs by tapping the “Uninstall” button.

By following the steps listed above, you should be able to fix Epson printer error code 0x95. In case things don’t work in your favor, it is advised to ask the professionals for assistance.

Opt for Professional Assistance to Resolve Printer Issues at the Earliest:

Are you finding it difficult to fix printer error code 0X95? Wondering if you should take your device to a nearby Epson printer repair center?  Trust our skilled engineers at EpsonSupport247 when you need to fix printer and get rid of all complicated errors immediately. If you are not a professional Windows user and if you lack technical knowledge about printers and Windows OS, choose to visit our printer repair center and get immediate assistance from the experts at EpsonSupport247.